Stainless steel tank - high grade steel with durable polished finish
Heater mat and sensor bonded to underside of tank – optimises temperature uniformity, workspace and it is easy to clean
Simple and intuitive programming – immediate temperature re-setting from -/+ buttons
Grant non-drip polycarbonate lid, included as standard – improves performance, limits evaporation and conserves energy
Clean, painted steel case – maximum chemical and abrasion resistance
Clear, wide-angle viewing digital LED display with indication of heating state – ‘heating-up’,‘cooling down’ or ‘maintaining temperature’
Fixed thermal cut-out – protects the user if the bath is accidentally run without water or in the very unlikely event of failure of both control systems
Front panel lock-out - disables front panel controls and prevents settings being accidentally changed
Grant polycarbonate perforated base tray, included as standard – promotes heat convection and optimal temperature uniformity and allows any container to be placed directly in the bath
Three programmable temperature presets - allows commonly used temperatures to be quickly selected
User settable, over-temperature sample protection - protects samples from over-heating
Countdown timer with audible buzzer - for accurate reaction timing
Digital PID temperature control circuitry – with sensitive PT1000 temperature control probe
User calibration – single or dual-point for optimum re-calibration of your working temperature
Raised feet – allow lifting whilst holding base of tank

Specifications :

Tank capacity		litres	2
Overall dimensions	h/d/w	mm	215/200/190
Temperature range		°C	ambient + 5°C to 99°C
Temperature setting range		°C	10 to 99 in 0.1 steps
Stability		°C	± 0.2
Temperature setting/energy regulation			digital
Temperature display			3 digit bright, wide-angle view LED
Working volume	l/w/d	mm	125/140/115
Overall consumption	120V/230V	kW	0.13

Send Enquiry

SUB Aqua 2 s Plus

Features :

Stainless steel tank – high grade steel with durable polished finish
Heater mat and sensor bonded to underside of tank – optimises temperature uniformity, workspace and it is easy to clean
Simple and intuitive programming – immediate temperature re-setting from -/+ buttons
Clear wide-angle view digital LED display – makes it easy keep an eye on the temperature, even from a distance
Three programmable temperature presets - allows commonly used temperatures to be quickly selected
Front panel lock out - disables front panel controls and prevents settings being accidetally changed
Fixed thermal cut-out – protects the user if the bath is accidentally run without water or in the very unlikely event of failure of control system
Countdown timer with audible buzzer - for accurate reaction timing
Grant polycarbonate perforated base tray, included as standard – promotes heat convection and optimal temperature uniformity and allows any container to be placed directly in the bath
User settable, over-temperature sample protection - protects samples from over-heating
User calibration – single or dual-point for optimum re-calibration of your working temperature
Raised feet – allow lifting whilst holding base of tank

Specifications :

Tank capacity		litres	2
Overall dimensions	h/d/w	mm	150/210/335
Temperature range		°C	ambient + 5°C to 99°C
Temperature setting range		°C	10 to 99 in 0.1 steps
Stability		°C	0.2
Temperature setting/energy regulation			digital
Temperature display			3 digit bright, wide-angle view LED
Working volume	l/w/d	mm	145/295/30
Overall consumption	1230V/230V	kW	0.38
Supply voltage		V	120 or 230
Sample protection			adjustable cut-out

Send Enquiry

SUB Aqua 5 Plus

Features :

Stainless steel tank - high grade steel with durable polished finish
Heater mat and sensor bonded to underside of tank – optimises temperature uniformity, workspace and it is easy to clean
Simple and intuitive programming – immediate temperature re-setting from -/+ buttons
Clean, painted steel case – maximum chemical and abrasion resistance
Clear, wide-angle viewing digital LED display with indication of heating state – ‘heating-up’,‘cooling down’ or ‘maintaining temperature’
Fixed thermal cut-out – protects the user if the bath is accidentally run without water or in the very unlikely event of failure of both control systems
Front panel lock-out - disables front panel controls and prevents settings being accidentally changed
Grant polycarbonate perforated base tray, included as standard – promotes heat convection and optimal temperature uniformity and allows any container to be placed directly in the bath
User settable, over-temperature sample protection - protects samples from over-heating
Countdown timer with audible buzzer - for accurate reaction timing
Digital PID temperature control circuitry – with sensitive PT1000 temperature control probe
User calibration – single or dual-point for optimum re-calibration of your working temperature
Raised feet – allow lifting whilst holding base of tan

Specifications :

Tank capacity		litres	5
Overall dimensions	h/d/w	mm	270/215/335
Temperature range		°C	ambient + 5°C to 99°C
Temperature setting range		°C	10 to 99 in 0.1 steps
Stability		°C	± 0.2
Temperature setting/energy regulation			digital
Temperature display			3 digit bright, wide-angle view LED
Working volume	l/w/d	mm	145/290/115
Overall consumption	120V/230V	kW	0.38
Supply voltage		V	120 or 230

Send Enquiry

SUB Aqua 12 Plus

Features :

Stainless steel tank - high grade steel with durable polished finish
Drain tap - allows convenient emptying
Heater mat and sensor bonded to underside of tank – optimises temperature uniformity, workspace and it is easy to clean
Simple and intuitive programming – immediate temperature re-setting from -/+ buttons
Grant non-drip polycarbonate lid, included as standard – improves performance, limits evaporation and conserves energy
Clean, painted steel case – maximum chemical and abrasion resistance
Fixed thermal cut-out – protects the user if the bath is accidentally run without water or in the very unlikely event of failure of both control systems
Front panel lock-out - disables front panel controls and prevents settings being accidentally changed
Grant polycarbonate perforated base tray, included as standard – promotes heat convection and optimal temperature uniformity and allows any container to be placed directly in the bath
Three programmable temperature presets - allows commonly used temperatures to be quickly selected
User settable, over-temperature sample protection - protects samples from over-heating
Digital PID temperature control circuitry – with sensitive PT1000 temperature control probe
User calibration – single or dual-point for optimum re-calibration of your working temperature
Raised feet – allow lifting whilst holding base of tank

Specifications :

Tank capacity		litres	12
Overall dimensions	h/d/w	mm	270/390/335
Temperature range		°C	ambient + 5°C to 99°C
Temperature setting range		°C	10 to 99 in 0.1 steps
Stability		°C	± 0.2
Temperature setting/energy regulation			digital
Temperature display			3 digit bright, wide-angle view LED
Working volume	l/w/d	mm	315/290/115
Overall consumption	120V/230V	kW	0.77
Supply voltage		V	120 or 230

Send Enquiry

SUB Aqua 18 Plus

Features :

Stainless steel tank - high grade steel with durable polished finish
Drain tap - allows convenient emptying
Heater mat and sensor bonded to underside of tank – optimises temperature uniformity, workspace and it is easy to clean
Simple and intuitive programming – immediate temperature re-setting from -/+ buttons
Grant non-drip polycarbonate lid , included as standard – improves performance, limits evaporation and conserves energy
Clean, painted steel case – maximum chemical and abrasion resistance
Clear, wide-angle viewing digital LED display with indication of heating state – ‘heating-up’,‘cooling down’ or ‘maintaining temperature’
Fixed thermal cut-out – protects the user if the bath is accidentally run without water or in the very unlikely event of failure of both control systems
Front panel lock-out - disables front panel controls and prevents settings being accidentally changed
Grant polycarbonate perforated base tray , included as standard – promotes heat convection and optimal temperature uniformity and allows any container to be placed directly in the bath
Three programmable temperature presets - allows commonly used temperatures to be quickly selected
User settable, over-temperature sample protection - protects samples from over-heating
Countdown timer with audible buzzer - for accurate reaction timing
Digital PID temperature control circuitry – with sensitive PT1000 temperature control probe
User calibration – single or dual-point for optimum re-calibration of your working temperature
Raised feet – allow lifting whilst holding base of tank

Specifications :

Tank capacity		litres	18
Overall dimensions	h/d/w	mm	270/570/335
Temperature range		°C	ambient + 5°C to 99°C
Temperature setting range		°C	10 to 99 in 0.1 steps
Stability		°C	± 0.2
Temperature setting/energy regulation			digital
Temperature display			3 digit bright, wide-angle view LED
Working volume	l/w/d	mm	495/290/115
Overall consumption	230V	kW	1.5
	120V	kW	1.2
Supply voltage		V	120 or 230
Sample protection			adjustable cut-out
CSA approved			yes

Send Enquiry

SUB Aqua 26 Plus

Features :

Stainless steel tank - high grade steel with durable polished finish
Drain tap - allows convenient emptying
Heater mat and sensor bonded to underside of tank – optimises temperature uniformity, workspace and it is easy to clean
Simple and intuitive programming – immediate temperature re-setting from -/+ buttons
Grant non-drip polycarbonate lid , included as standard – improves performance, limits evaporation and conserves energy
Clean, painted steel case – maximum chemical and abrasion resistance
Clear, wide-angle viewing digital LED display with indication of heating state – ‘heating-up’,‘cooling down’ or ‘maintaining temperature’
Fixed thermal cut-out – protects the user if the bath is accidentally run without water or in the very unlikely event of failure of both control systems
Front panel lock-out - disables front panel controls and prevents settings being accidentally changed
Grant polycarbonate perforated base tray, included as standard – promotes heat convection and optimal temperature uniformity and allows any container to be placed directly in the bath
Three programmable temperature presets - allows commonly used temperatures to be quickly selected
User settable, over-temperature sample protection - protects samples from over-heating
Countdown timer with audible buzzer - for accurate reaction timing
Digital PID temperature control circuitry – with sensitive PT1000 temperature control probe
Raised feet – allow lifting whilst holding base of tank

Specifications :

Tank capacity		litres	26
Overall dimensions	h/d/w	mm	270/570/335
Temperature range		°C	ambient + 5°C to 99°C
Temperature setting range		°C	10 to 99 in 0.1 steps
Stability		°C	± 0.2
Temperature setting/energy regulation			digital
Temperature display			3 digit bright, wide-angle view LED
Working volume	l/w/d	mm	495/290/165
Overall consumption	230V	kW	1.5
	120V	kW	1.2
Supply voltage		V	120 or 230
Sample protection			adjustable cut-out
CSA approved			yes

Send Enquiry

SUB Aqua 34 Plus

Features :

Stainless steel tank - high grade steel with durable polished finish
Drain tap - allows convenient emptying
Heater mat and sensor bonded to underside of tank – optimises temperature uniformity, workspace and it is easy to clean
Simple and intuitive programming – immediate temperature re-setting from -/+ buttons
Grant stainless steel lid, included as standard – improves performance, limits evaporation and conserves energy
Clean, painted steel case – maximum chemical and abrasion resistance
Clear, wide-angle viewing digital LED display with indication of heating state – ‘heating-up’,‘cooling down’ or ‘maintaining temperature’
Fixed thermal cut-out – protects the user if the bath is accidentally run without water or in the very unlikely event of failure of both control systems
Front panel lock-out - disables front panel controls and prevents settings being accidentally changed
Grant stainless steel base tray, included as standard – promotes heat convection and optimal temperature uniformity and allows any container to be placed directly in the bath
Three programmable temperature presets - allows commonly used temperatures to be quickly selected
User settable, over-temperature sample protection - protects samples from over-heating
Countdown timer with audible buzzer - for accurate reaction timing
Digital PID temperature control circuitry – with sensitive PT1000 temperature control probe
User calibration – single or dual-point for optimum re-calibration of your working temperature
Raised feet – allow lifting whilst holding base of tank

Specifications :

Tank capacity		litres	34
Overall dimensions	h/d/w	mm	270/750/340
Temperature range		°C	ambient + 5°C to 99°C
Temperature setting range		°C	10 to 99 in 0.1 steps
Stability		°C	± 0.2
Temperature setting/energy regulation			digital
Temperature display			3 digit bright, wide-angle view LED
Working volume	l/w/d	mm	630/290/160
Overall consumption	230V	kW	2.0
	120V	kW	1.3
Supply voltage		V	120 or 230
Sample protection			adjustable cut-out

Send Enquiry

SUB Aqua Dual Plus

Features :

Stainless steel tank - high grade steel with durable polished finish
Heater mat and sensor bonded to underside of tank – optimises temperature uniformity, workspace and it is easy to clean
Simple and intuitive programming – immediate temperature re-setting from -/+ buttons
Clean, painted steel case – maximum chemical and abrasion resistance
Dual controls - simple, separate set-ups and temperature displays for complete clarity
Dual lids - to provide separate access and reduce evaporation
Clear, wide-angle viewing digital LED display with indication of heating state – ‘heating-up’,‘cooling down’ or ‘maintaining temperature’
Fixed thermal cut-out – protects the user if the bath is accidentally run without water or in the very unlikely event of failure of both control systems
Front panel lock-out - disables front panel controls and prevents settings being accidentally changed
Grant polycarbonate perforated base tray, included as standard – promotes heat convection and optimal temperature uniformity and allows any container to be placed directly in the bath
Three programmable temperature presets - allows commonly used temperatures to be quickly selected
User settable, over-temperature sample protection - protects samples from over-heating
Countdown timer with audible buzzer - for accurate reaction timing
Single power lead
Digital PID temperature control circuitry – with sensitive PT1000 temperature control probe
User calibration – single or dual-point for optimum re-calibration of your working temperature
Raised feet – allow lifting whilst holding base of tank

Specifications :

Tank capacity		litres	5 and 12
Overall dimensions	h/d/w	mm	225/360/540
Temperature range		°C	ambient + 5°C to 99°C
Temperature setting range		°C	10 to 99 in 0.1 steps
Stability		°C	± 0.2
Temperature setting/energy regulation			digital
Temperature display			3 digit bright, wide-angle view LED
Working volume	l/w/d	mm	145/290/115 and 315/290/115
Overall consumption	230V	kW	1.2
	120V	kW	1.2
Supply voltage		V	120 or 230
Sample protection			adjustable cut-out
CSA approved			yes

Send Enquiry

JB Aqua 2 Plus

Features :

Stainless steel tank – high grade seel with durable polished finish
Clean, painted steel case – maximum chemical and abrasion resistance
User settable, over-temperature cutout - when sample has critical maximum temperature
Fixed thermal cutout – protects the user if the bath is accidentally run without water or in the very unlikely event of failure of both control systems
Raised feet – allows lifting whilst holding base of tank
Grant non drip polycarbonate lid included as standard – improves performance, limits evaporation and conserves energy
Simple dial temperature setting – easy to use and provides quick visual indication of temperature and ability to re-set dial position
Polycarbonate perforated base tray included as standard – promotes heat convection and optimal temperature uniformity, also allows any container to be placed directly in bath
Heater mat and sensor bonded to the underside of the tank – optimises temperature uniformity and workspace
Removable knob– enables calibration

Specifications :

Tank capacity		litres	2
Overall dimensions	h/d/w	mm	215/200/190
Temperature range		°C	ambient + 5°C to 98°C
Temperature setting range		°C	10 to 98 in 2.0 steps
Stability	@37	°C	± 1.0
Temperature setting/energy regulation			Analogue
Working volume	l/w/d	mm	125/140/115
Overall consumption	120V	kW	0.13
	230V	kW	0.13
Supply voltage		V	120 or 230
Sample protection			adjustable cut-out
CSA approved			yes

Send Enquiry

JB Aqua 2 s Plus

Features :

Stainless steel tank – high grade seel with durable polished finish
Clean, painted steel case – maximum chemical and abrasion resistance
User settable, over-temperature cut-out - when sample has critical maximum temperature
Fixed thermal cut-out – protects the user if the bath is accidentally run without water or in the very unlikely event of failure of both control systems
Raised feet – allows lifting whilst holding base of tank
Grant non-drip polycarbonate lid, included as standard – improves performance, limits evaporation and conserves energy
Simple dial temperature setting – easy to use and provides quick visual indication of temperature and ability to re-set dial position
Polycarbonate perforated base tray, included as standard – promotes heat convection and optimal temperature uniformity, also allows any container to be placed directly in bath
Heater mat and sensor bonded to the underside of the tank – optimises temperature uniformity and workspace
Removable knob– enables calibration

Specifications :

Tank capacity		litres	2
Overall dimensions	h/d/w	mm	150/210/335
Temperature range		°C	ambient + 5°C to 98°C
Temperature setting range		°C	10 to 98 in 2.0 steps
Stability	@37	°C	± 1.0
Temperature setting/energy regulation			analogue
Working volume	l/w/d	mm	145/290/30
Overall consumption	120V	kW	0.375
	230V	kW	0.375
Supply voltage		V	120 or 230
Sample protection			adjustable cut-out
CSA approved			yes

Send Enquiry

JB Aqua 5 Plus

Features :

Stainless steel tank – high grade seel with durable polished finish
Clean, painted steel case – maximum chemical and abrasion resistance
User settable, over-temperature cut-out - when sample has critical maximum temperature
Fixed thermal cut-out – protects the user if the bath is accidentally run without water or in the very unlikely event of failure of both control systems
Raised feet – allows lifting whilst holding base of tank
Grant non-drip polycarbonate lid, included as standard – improves performance, limits evaporation and conserves energy
Simple dial temperature setting – easy to use and provides quick visual indication of temperature and ability to re-set dial position
Polycarbonate perforated base tray, included as standard – promotes heat convection and optimal temperature uniformity, also allows any container to be placed directly in bath
Heater mat and sensor bonded to the underside of the tank – optimises temperature uniformity and workspace
Removable knob– enables calibration.

Specifications :

Tank capacity		litres	5
Overall dimensions	h/d/w	mm	270/215/335
Temperature range		°C	ambient + 5°C to 98°C
Temperature setting range		°C	10 to 98 in 2.0 steps
Stability	@37	°C	± 1.0
Temperature setting/energy regulation			analogue
Working volume	l/w/d	mm	145/290/115
Overall consumption	120V	kW	0.375
	230V	kW	0.375
Supply voltage		V	120V or 230V
Sample protection			adjustable cut-out
CSA approved			yes

Send Enquiry

JB Aqua 12 Plus

Features :

Stainless steel tank – high grade seel with durable polished finish
Drain tap - allows convenient emptying
Clean, painted steel case – maximum chemical and abrasion resistance
User settable, over-temperature cut-out - when sample has critical maximum temperature
Fixed thermal cut-out – protects the user if the bath is accidentally run without water or in the very unlikely event of failure of both control systems
Raised feet – allows lifting whilst holding base of tank
Grant non-drip polycarbonate lid, included as standard – improves performance, limits evaporation and conserves energy
Simple dial temperature setting – easy to use and provides quick visual indication of temperature and ability to re-set dial position
Polycarbonate perforated base tray, included as standard – promotes heat convection and optimal temperature uniformity, also allows any container to be placed directly in bath
Heater mat and sensor bonded to the underside of the tank – optimises temperature uniformity and workspace
Removable knob– enables calibration

Specifications :

Tank capacity		litres	12
Overall dimensions	h/d/w	mm	270/390/335
Temperature range		°C	ambient + 5°C to 98°C
Temperature setting range		°C	10 to 98 in 2.0 steps
Stability	@37	°C	± 1.0
Temperature setting/energy regulation			analogue
Working volume	l/w/d	mm	315/290/115
Overall consumption	120V	kW	0.77
	230V	kW	0.77
Supply voltage		V	120 or 230
Sample protection			adjustable cut-out
CSA approved			yes

Send Enquiry

JB Aqua 18 Plus

Features :

Stainless steel tank – high grade seel with durable polished finish
Drain tap - allows convenient emptying
Clean, painted steel case – maximum chemical and abrasion resistance
User settable, over-temperature cut-out - when sample has critical maximum temperature
Fixed thermal cut-out – protects the user if the bath is accidentally run without water or in the very unlikely event of failure of both control systems
Raised feet – allows lifting whilst holding base of tank
Grant non-drip polycarbonate lid, included as standard – improves performance, limits evaporation and conserves energy
Simple dial temperature setting – easy to use and provides quick visual indication of temperature and ability to re-set dial position
Polycarbonate perforated base tray, included as standard – promotes heat convection and optimal temperature uniformity, also allows any container to be placed directly in bath
Heater mat and sensor bonded to the underside of the tank – optimises temperature uniformity and workspace
Removable knob– enables calibration

Specifications :

Tank capacity		litres	18
Overall dimensions	h/d/w	mm	270/570/335
Temperature range		°C	ambient + 5°C to 98°C
Temperature setting range		°C	10 to 98 in 2.0 steps
Stability		°C	± 1.0
Temperature setting/energy regulation			analogue
Working volume	l/w/d	mm	495/290/115
Overall consumption	120V	kW	1.2
	230V	kW	1.5
Supply voltage		V	120 or 230
Sample protection			adjustable cut-out
CSA approved			yes

Send Enquiry

JB Aqua 26 Plus

Features :

Stainless steel tank – high grade seel with durable polished finish
Drain tap - allows convenient emptying
Clean, painted steel case – maximum chemical and abrasion resistance
User settable, over-temperature cut-out - when sample has critical maximum temperature
Fixed thermal cut-out – protects the user if the bath is accidentally run without water or in the very unlikely event of failure of both control systems
Raised feet – allows lifting whilst holding base of tank
Grant non-drip polycarbonate lid, included as standard – improves performance, limits evaporation and conserves energy
Simple dial temperature setting – easy to use and provides quick visual indication of temperature and ability to re-set dial position
Polycarbonate perforated base tray, included as standard – promotes heat convection and optimal temperature uniformity, also allows any container to be placed directly in bath
Heater mat and sensor bonded to the underside of the tank – optimises temperature uniformity and workspace
Removable knob– enables calibration

Specifications :

Tank capacity		litres	26
Overall dimensions	h/d/w	mm	270/570/335
Temperature range		°C	ambient + 5°C to 98°C
Temperature setting range		°C	10 to 98 in 2.0 steps
Stability	@37	°C	± 1.0
Temperature setting/energy regulation			analogue
Working volume	l/w/d	mm	495/290/165
Overall consumption	120V	kW	1.2
	230V	kW	1.5
Supply voltage		V	120 or 230
Sample protection			adjustable cut-out
CSA approved			yes

Send Enquiry

JB Aqua Dual Plus

Features :

Stainless steel tank – high grade seel with durable polished finish
Clean, painted steel case – maximum chemical and abrasion resistance
User settable, over-temperature cut-out - when sample has critical maximum temperature
Fixed thermal cut-out – protects the user if the bath is accidentally run without water or in the very unlikely event of failure of both control systems
Raised feet – allows lifting whilst holding base of tank
Dual controls - simple separate set-ups
Grant non-drip polycarbonate lid, included as standard – improves performance, limits evaporation and conserves energy
Simple dial temperature setting – easy to use and provides quick visual indication of temperature and ability to re-set dial position
Polycarbonate perforated base tray, included as standard – promotes heat convection and optimal temperature uniformity, also allows any container to be placed directly in bath
Heater mat and sensor bonded to the underside of the tank – optimises temperature uniformity and workspace
Removable knob– enables calibration

Specifications :

Tank capacity		litres	5 and 12
Overall dimensions	h/d/w	mm	225/360/540
Temperature range		°C	ambient + 5°C to 98°C
Temperature setting range		°C	10 to 98 in 2.0 steps
Stability	@37	°C	± 1.0
Temperature setting/energy regulation			analogue
Working volume	l/w/d	mm	145/290/115 and 315/290/115
Overall consumption	120V	kW	1.2
	230V	kW	1.2
Supply voltage		V	120 or 230
Sample protection			adjustable cut-out
CSA approved			yes

Send Enquiry

Boiling bath SBB Aqua 5 Plus

Features :

Stainless steel tank in a robust outer case - tough and durable in demanding environments
Perforated tray to ensure uniform heat distribution, included as standard
Grant non-drip polycarbonate lid included as standard - improves performance, limits evaporation and conserves energy
Large available working area in relation to footprint
Constant level device maintains the required level for optimal operation
Two over-temperature cut-outs protect users and the workspace if bath is accidentally run without water
Adjustable energy regulator provides steady rolling boil
Wide range of accessory options for different applications

Specifications :

Operating Temperature		ºC	100
Energy regulation			analogue
Heater power, overall consumption	120V/230V	kW	1.3/1.5
Tank capacity		litres	5
Working volume	l/w/d	mm	145/290/105
Overall dimensions	l/w/d	mm	270/215/385
Safety	temperature		two fixed cut-outs
CSA Approved			yes

Send Enquiry

SBB Aqua 12 Plus

Features :

Stainless steel tank in a robust outer case - tough and durable in demanding environments
Perforated tray to ensure uniform heat distribution, included as standard
Grant non-drip polycarbonate lid included as standard - improves performance, limits evaporation and conserves energy
Large available working area in relation to footprint
Constant level device maintains the required level for optimal operation
Two over-temperature cut-outs protect users and the workspace if bath is accidentally run without liquid
Adjustable energy regulator provides steady boiling
Wide range of accessory options for different applications

Specifications :

Operating temperature		ºC	100 only*
Energy regulation			analogue
Heater power, overall consumption	120V/230V	kW	1.35/1.5
Tank capacity		litres	12
Working volume	l/w/d	mm	315/290/105
Overall dimensions	l/w/d	mm	270/390/385
Safety	temperature		two fixed cut-outs
CSA Approved			yes

Send Enquiry

Boiling bath SBB Aqua 18 Plus

Features :

Stainless steel tank in a robust outer case - tough and durable in demanding environments
Perforated tray to ensure uniform heat distribution, included as standard
Grant non-drip polycarbonate lid included as standard - improves performance, limits evaporation and conserves energy
Large available working area in relation to footprint
Constant level device maintains the required level for optimal operation
Two over-temperature cut-outs protect users and the workspace if bath is accidentally run without liquid
Adjustable energy regulator provides steady boiling
Wide range of accessory options for different applications

Specifications :

Operating temperature		ºC	100 only*
Energy regulation			analogue
Heater power, overall consumption	120V/230V	kW	1.35/2.0
Tank capacity		litres	18
Working volume	l/w/d	mm	495/290/105
Overall dimensions	l/w/d	mm	270/570/385
Safety	temperature		two fixed cut-outs
CSA approved			yes

Send Enquiry

Boiling Bath SBB Aqua 26 Plus

Features :

Stainless steel tank in a robust outer case - tough and durable in demanding environments
Perforated tray to ensure uniform heat distribution, included as standard
Grant non-drip polycarbonate lid included as standard - improves performance, limits evaporation and conserves energy
Large available working area in relation to footprint
Constant level device maintains the required level for optimal operation
Two over-temperature cut-outs protect users and the workspace if bath is accidentally run without liquid
Adjustable energy regulator provides steady boiling
Wide range of accessory options for different applications

Specifications :

Operating temperature		ºC	100 only*
Energy regulation			analogue
Heater power, overall consumption	120V/230V	kW	1.35/2.0
Tank capacity		litres	26
Working volume	l/w/d	mm	495/290/155
Overall dimensions	l/w/d	mm	300/570/385
Safety	temperature		two fixed cut-outs
CSA approved			yes

Send Enquiry

Transparent Unstirred Water Bath PB1

Features :

Removable control unit with simple to use analogue temperature setting dial
Clear polycarbonate tank for easy visibility of reactions within the vessels
Perforated tray to mix the liquid by convection and enhance the performance
Choice of optional accessories for different applications
User-resettable over-temperature cut-out for confidence that equipment and workplace are protected

Specifications :

Temperature range		ºC		ambient +5 to 60
Temperature setting range		ºC		10 to 60
Stability (DIN58966) @37ºC		ºC		±0.3
Temperature setting				analogue
Heater power	220 – 240V	kW		0.3
	110 – 120V	kW		–
Overall consumption	220 – 240V	kW		0.3
	110 – 120V	kW		–
Tank capacity		litres		3.5
Working volume	l/w/d	mm		225/120/80
Overall dimensions	l/w/d	mm		355/160/130
Safety	temperature			fixed cut-out
Electrical supply			V	220 – 240

Send Enquiry

BioLinx India
Mr. Girish Nair . (Director)
106, Indirajeet Apts ,Behind Marathi School, Majiwada, Thane , Maharashtra
Mumbai - 400601, Maharashtra, India